Which Macap grinders is this burr pair compatible with?
This pair is compatible with these Macap models and versions: M7; M7-1400, including (200501-); M7-1400RPM-DX (2019); M7-A; M7-A-T-P (200110-) and (200401-); M7-P; M7-T; M7A-1400RPM-DX (2019); M7AZ-1400RPM-DX (2019); M7T-1400RPM-DX (2019); M7TZ-1400RPM-DX (2019); M7Z-1400RPM-DX (2019); MC7, including (2019), (200401-) and (200501-); MC7 Series; MC7T; MX-D; MXD, including (2019) and (201001-); MXDZ (2019); and R7AP, including (200110-). Match the complete model designation and any date or version code before ordering.
Does the package contain one burr or a pair?
The package contains two aftermarket flat grinding burrs, supplied as one pair. It does not include a motor or complete grinding unit.
What are the dimensions of these Macap replacement burrs?
Each flat burr has a 74 mm outer diameter, a 42 mm inner diameter and a 9 mm thickness. Check these measurements against your existing burrs along with the grinder model and version.
Which rotation and fixing arrangement do the burrs use?
These burrs use right-hand rotation and three screw-fixing holes on each burr. Check the fixing positions and burr seating when fitting the replacement pair.
Are these original Macap burrs, and where are they made?
These are aftermarket replacement burrs, not original Macap parts. They are manufactured in Italy from hardened steel.
Should I replace both grinding burrs together?
This set supplies both grinding burrs so you can replace the pair together when the existing cutting components are worn or damaged.
What should I check after installing the burrs?
Check that the burrs are seated correctly and aligned, then adjust the grind setting before use. During installation, also confirm the dimensions, right-hand rotation and fixing positions.