Will this pump fit my Crem or Expobar espresso machine?
This pump is listed for Crem / Expobar Office-Leva and G-10-Autoexpulsora machines. Compare part number 60000033 with your original pump and check the exact machine version, flow rating, connections and mounting arrangement. It is not a universal replacement for every Crem or Expobar machine.
Who makes this pump, and which part number should I check?
The pump is made by Fluid-O-Tech for Crem / Expobar. Its model and replacement part reference are 60000033. Use this reference together with the 70 L/H flow rating and physical fit when comparing it with your existing pump.
What does the 70 L/H flow rating mean?
70 L/H means a listed water flow rate of 70 litres per hour. It describes the pump's flow specification, not how much espresso the machine produces. The rating does not guarantee the same flow at every operating pressure.
What fittings does this rotary pump use?
The fittings are listed as 3/8-inch GAS. Compare them with the connections on your existing pump and check the mounting arrangement too. The fitting size alone is not enough to confirm that this is the right replacement.
Will a replacement pump fix low pressure or poor water flow?
It can help if the pump itself is worn or faulty. Poor flow and reduced brewing pressure can also have other causes, so we recommend having the fault checked first. Replacing the pump will not fix a problem elsewhere in the machine.
Where is the pump made, and what materials does it use?
This rotary vane pump is made in Italy and has a brass body with rubber gaskets. It is listed as NSF certified. It moves water through the espresso machine's internal water circuit to support brewing.
Does the pump come with a motor or installation accessories?
You will receive one Crem replacement rotary pump. A drive motor and additional installation accessories are not listed as included, so please do not assume that hoses, fittings or mounting hardware come with it. Check which parts your machine needs before ordering.